Products
Road Sweeper Truck

Dongfeng Highway Sweeper for Fast-Road Contracts

Fast-road sweeping contracts get this Dongfeng 4x2 sweeper (street sweeper), whose Cummins engine produces 140 kW, 190 HP from 4500 ml on a 5300 mm wheelbase, 18,000 kg gross with 4070 kg payload, in a 9100x2500x3500 mm footprint. The machine reports a cleaning rate above 97% at 60 km/h working speed with operation noise below 88 dBA, using mechanical collection from four enlarged central steel-wire disc brushes plus dual side brooms and central suction across a 2.4-3.5 m sweep width. Three widened 220 mm dust ports feed an 8 m3 debris hopper with stainless wear lining; the hopper lifts and self-cleans on internal high-pressure water, dumping past a 50-degree angle for thorough discharge. A spray-suppression water tank with flush and kerb-jet nozzles holds dust down, and a high-flow fan with filter shaker captures fines. Hydraulic gear pumps take power on demand through engine PTO with an auxiliary diesel for full-sweep duty; one-button presets, an auxiliary panel, and remote control run operation. Modular disc, roller, and conveyor units simplify service, and highway and expressway maintenance rounds define the application.

WhatsApp your destination port - FOB price within 24 hours, plus the full spec sheet.

Reply within 12 hours · MOQ 1 unit · Build 15–30 days · Tell us your chassis, drive, capacity and color needs — we build to order
Factory-direct price (no trader markup) Supports 100% customization 2-year warranty + lifetime parts Full export docs (B/L, CO, invoice)

Sweep-suction body with stainless wear plates, dust suppression and large-capacity tanks, sweeping roads, ports and industrial parks in one pass.

Dongfeng Highway Sweeper for Fast-Road Contracts

General

Vehicle Brand

DONGFENG

Overall Dimension

9100X2500X3500 mm

Rated Load Capacity

4070 kg

Total Mass

18000 kg

Cab

Air Conditioner

Standard

Engine

Fuel Type

Diesel

Power

Cummins Engine 140kw/190hp

Displacement

4500 ml

Chassis

Drive Type

4X2

Chassis Brand

DONGFENG

Wheelbase

5300 mm

Top Structure

1

At a speed of 60km/h, the cleaning rate is >97%, which is much higher than the industry standard; The suction cup is widened and enlarged, with three 220mm The diameter of the dust suction hole can effectively suck the garbage into the garbage bin. The garbage bin is a lifting and self-unloading structure with a high-pressure water self-cleaning device inside the garbage bin. The overall dumping angle is >50°, and the garbage is dumped more thoroughly.

2

The mechanical garbage collection structure is adopted, and the cleaning operation noise is <88dBA, which is at the advanced level in the industry:

3

The hydraulic gear pump is used to take power on demand, reduce the generation of hydraulic auxiliary heat, and effectively reduce fuel consumption;

4

"Manual + automatic" integration is suitable for speed regulation of operation units in different scenarios, which is more stable

5

Lightweight design, the whole vehicle is fully loaded without overloading, and the fuel consumption is reduced by 40% compared with similar products on the market:

6

The disc brush, roller brush, and garbage conveying device adopt modular design, and the maintenance of a single module is more convenient, more worry-free, and more economical;

7

The operation mode can be preset to achieve one-button operation, which is efficient and convenient. At the same time, it is equipped with an auxiliary control button panel and a remote control to realize auxiliary operation in the parking state;

8

The four sweeping discs are placed in the middle, and they are all enlarged sweeping discs with steel wires to effectively clean the road surface

Sweep System

Dual side brooms + central suction, full-width sweep 2.4-3.5 m

Trash Tank

8 m3 debris hopper with stainless wear lining

Water Tank

Spray-suppression water tank with flush nozzles

Vacuum Fan

High-flow fan, dust capture with filter shaker

Dust Control

Wet sweep + filtration keeps exhaust clean at the kerb

Nozzles

Kerb-flush side jets for gutter line cleaning

Discharge

Hydraulic hopper lift for tip-out at depot

Control

Cab panel with one-key sweep program; ground maintenance panel

Power

Engine PTO main fan; auxiliary diesel for full-sweep duty

Application

Highway and expressway sweep contracts

Options

Self-cleaning filter, mist cannon mount, high-pressure washer, GPS route log

Docs & Warranty

GB announcement; 2-year upfit warranty

Key Upfit Features

  • 1: At a speed of 60km/h, the cleaning rate is >97%, which is much higher than the industry standard; The suction cup is widened and enlarged, with three 220mm The diameter of the dust suction hole can effectively suck the garbage into the garbage bin. The garbage bin is a lifting and self-unloading structure with a high-pressure water self-cleaning device inside the garbage bin. The overall dumping angle is >50°, and the garbage is dumped more thoroughly.
  • 2: The mechanical garbage collection structure is adopted, and the cleaning operation noise is <88dBA, which is at the advanced level in the industry:
  • 3: The hydraulic gear pump is used to take power on demand, reduce the generation of hydraulic auxiliary heat, and effectively reduce fuel consumption;

Factory Direct

CLW Chengli, Suizhou — ISO 9001 & CCC certified

MOQ 1 Unit

Mixed batch and stock chassis available

Export Ready

SEA / Ro-Ro / container + full documents

Lifetime Support

Genuine parts and remote commissioning

Send A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Subject : Dongfeng Highway Sweeper for Fast-Road Contracts

Related Products

You may be interested in the following products...

FAQ About Sanitation Truck

How much does this truck cost and what is the MOQ?
CLW is a factory-direct manufacturer, so you get the lowest possible price without middlemen. Final price depends on chassis brand (ISUZU, SINOTRUK, SHACMAN, DONGFENG, FOTON, JAC), tank or body capacity and equipment options. MOQ is 1 unit for most models. Send your requirement via WhatsApp +86 159 6944 9241 for a detailed quotation within 12 hours.
Can you customize the capacity, chassis and upper equipment?
Yes. With 300+ product categories and 800+ models in our MIIT catalog, we customize body capacity, dimensions, unloading systems, PTO, hydraulic equipment and cab options to your local road regulations and working conditions. Our 500+ engineers provide drawings before production.
How do you ship to my country and what is the delivery time?
We export by RoRo vessel, 40FT/40FR/40OT container or flat rack depending on dimensions, to ports in Africa, Southeast Asia, the Middle East, South America and CIS countries. Standard delivery time is 15–30 working days after deposit. Export documentation (BL, CO, CI, packing list) included.
What warranty and after-sales support do you provide?
Two-year warranty on the whole vehicle (engine and gearbox covered per chassis manufacturer policy), lifelong genuine spare parts supply at factory price, free technical training for your maintenance team, and video/online support for installation and debugging.

Related Articles & Delivery Cases

At the 140th Canton Fair, CLW's Best Sales Tool Was a Calculator News At the 140th Canton Fair, CLW's Best Sales Tool Was a Calculator First Batch of Ten Heavy Fire Trucks Rolls Out from CLW for Malaysia News First Batch of Ten Heavy Fire Trucks Rolls Out from CLW for Malaysia 10 Units Dongfeng 6x4 Car Carrier Truck for Sale to Ghana, Hydraulic Upper Deck Auto Transporter Delivery Case 10 Units Dongfeng 6x4 Car Carrier Truck for Sale to Ghana, Hydraulic Upper Deck Auto Transporter 10 Units SHACMAN X6 Truck Mounted Crane for Sale, XCMG SQS175-4 7 Ton Boom to Uganda Delivery Case 10 Units SHACMAN X6 Truck Mounted Crane for Sale, XCMG SQS175-4 7 Ton Boom to Uganda

Request a Quote

Tell us your truck model and quantity — an engineer replies within 12 hours with a factory-direct price.

Factory-direct12-hour replyFOB / CIF / DDP
Home Products About Us Contact Us