Knuckle Boom Crane Dump Truck for Sale – CLW 4x2 Crane Tipper with 5-8 Ton Lift

★ A black CLW 4x2 crane tipper with a 5-8 t knuckle boom behind the cab, a 5-8 m³ front-lift dump body and 360° slewing for loading and hauling on one chassis.

Knuckle Boom Crane Behind the Cab

▶ The crane is a black folding-boom knuckle crane mounted on a reinforced subframe directly behind the cab. It lifts 5,000-8,000 kg at close radius, reaches 10-14 m with the boom extended and lifts to 12-16 m, with 360° slewing for placement on either side of the truck.

Two front and two rear hydraulic outriggers stabilise the truck during lifting, and the outrigger legs have screw jacks and foot pads for uneven ground. The crane runs at 20-25 MPa from a 60-100 L oil tank, with manual lever control and an optional remote control.

Front-Lift Steel Tipper Body

▶ The tipper body is 4,000-4,500 mm long, 2,200-2,350 mm wide and 5-8 m³ in volume, with 600-800 mm side boards and a hinged tailgate. The body is built from Q235/Q345 steel with 3-4 mm side panels and a 4-5 mm floor, and the sides carry vertical reinforcement ribs.

A front telescopic cylinder tips the body to 45-50° for unloading sand, gravel, rubble, steel scrap and construction waste. The body sits on a black subframe that also carries the crane, and the tailgate opens on quick-release hinges for rear discharge.

CLW 4x2 Chassis and Driveline

▶ The chassis is the CLW 4x2 with a black flat-roof cab, air conditioning, power steering and a 160-220 hp diesel engine of 4.5-6.2 L displacement. A 6-speed manual gearbox drives the single rear axle, and the truck runs on 8.25R20 or 9.00R20 tyres.

GVW is 12,000-16,000 kg, curb weight 7,000-9,000 kg and payload 4,000-7,000 kg, on a 3,800-4,500 mm wheelbase. Overall size is 7,500-8,500 mm long, 2,300-2,500 mm wide and 3,300-3,700 mm high, with a 150-200 L fuel tank, air brakes and a 24 V electrical system.

Applications and Export Delivery

▶ The truck suits construction sites, road maintenance, quarry and yard work, scrap collection, municipal cleaning and plant rental fleets. The crane loads pipes, blocks, pallets and machinery while the tipper carries sand, gravel and debris, so one truck replaces a separate crane and dump truck.

Left-hand drive is standard and right-hand drive is available to order. Options include a larger crane, a remote control, extra work lights, a reversing camera, a spare-wheel carrier and an export spare-parts kit. Production is 25-40 days, with container or ro-ro shipping and full export documents.

Frequently Asked Questions

How much can the knuckle boom crane lift?

The crane lifts 5,000-8,000 kg at close radius, reaches 10-14 m and lifts to 12-16 m. Capacity decreases as the boom extends, and the load chart supplied with each crane gives the exact figure for every radius.

How large is the dump body?

The front-lift steel body is 4,000-4,500 mm long, 2,200-2,350 mm wide and 5-8 m³ in volume, with 600-800 mm side boards and a 45-50° tipping angle.

Can it be supplied with right-hand drive?

Yes. Left-hand drive is standard and right-hand drive is available to order, with the crane controls and outrigger valves matched to the driving side. Production is 25-40 days.

Send your lifting duty, body volume, drive position and destination port for a CLW 4x2 knuckle boom crane dump truck quotation within 24 hours.