20 CBM Water Sprinkler Truck for Sale – SHACMAN F3000 6x4 300 HP Tanker

★ A SHACMAN F3000 6x4 water sprinkler truck with a 20,000 L tank, PTO pump, front, side and rear spray bars and a rear water cannon for road watering and dust control.

20,000 L Tank and Water System

▶ The tank is an elliptical steel vessel of approximately 20,000 L, made from 4-5 mm Q235 steel with internal baffles to reduce surge when the truck is moving. A manhole on top allows filling and cleaning, and the top walkway rail gives safe access to the hatch.

The water system includes a PTO-driven self-priming pump, a suction hose with a strainer, front flushing nozzles under the bumper, side spray bars along both sides and a rear sprinkler bar. The rear platform carries a rotating water cannon for dust suppression and street washing.

Pump and Spraying Performance

▶ The pump delivers approximately 800-1,200 L/min with a suction lift of 6-8 m, so the truck can refill from a river, pond, canal or hydrant. The water cannon reaches 25-35 m, and the side spray bars cover a width of roughly 12-15 m for road watering and dust control.

Valves in the cab and at the rear platform let the operator switch between filling, front flushing, side spraying, rear sprinkling and cannon operation. A low-water level indicator and a pressure relief valve protect the pump when the tank runs dry.

SHACMAN F3000 6x4 Chassis

▶ The chassis is the SHACMAN F3000 6x4 with a 300 hp diesel engine and a 9-speed manual gearbox. The tandem rear axles carry the full water load on site roads, and the flat-floor F3000 cab has air seats, air conditioning and a tiltable cab.

The truck uses 11.00R20 or 12.00R20 tyres, a 300-400 L fuel tank, a steel bumper and an aluminum side guard. The white cab and tank are finished with blue SHACMAN graphics, and the blue top rail and rear platform match the livery.

Applications and Export Options

▶ Typical work includes municipal road watering, street washing, construction-site dust suppression, plant watering, fire-fighting support, landscaping and event dust control. The 20 m³ tank reduces refill trips on large sites.

Options include a stainless steel tank, a higher-capacity pump, an insulation layer, a snowplow mounting, a rear fog cannon, a spare wheel carrier and an export spare-parts kit. Left-hand drive is standard; right-hand drive, container and ro-ro shipping are available. Production is quoted at 25-40 days.

Frequently Asked Questions

How much water does this sprinkler truck carry?

The elliptical steel tank holds approximately 20,000 L, with a normal range of 18,000-22,000 L depending on the final tank drawing. It is built for road watering and dust suppression.

What is the spraying range?

The rear water cannon reaches approximately 25-35 m, and the side spray bars cover a width of about 12-15 m. The PTO pump delivers about 800-1,200 L/min.

Can the truck refill from a river or pond?

Yes. The self-priming pump has a suction lift of approximately 6-8 m and comes with a suction hose and strainer, so it can refill from rivers, ponds, canals and hydrants.

Send your required tank capacity, spray configuration and destination port for a SHACMAN F3000 6x4 20 CBM water sprinkler truck quotation within 24 hours.