Products
Road Sweeper Truck

Dongfeng 11cbm Sweep-Suction Truck for Trunk Roads

Sweep and suction merge on this Dongfeng 4x2 road sweeper, powered by a Cummins 230 hp diesel of 4087 ml through a Fast eight-speed transmission, carrying 6670 kg rated payload under 18000 kg gross mass. Dual side brooms feed a central suction head; the rear roller suction cup spans 2.4 m with a built-in high-pressure spray rod, while full-width sweep reaches 2.4 to 3.5 m.

A high-flow vacuum fan with filter shaker captures dust to reported cleanliness above 99 percent with no secondary plume, and wet sweeping plus kerb-flush side jets keep the gutter line clean. The debris hopper wears a stainless steel wear lining, with sloped sides and a lengthened self-cleaning spray rod aiding emptying; a hydraulic lift tips at the depot. Spray-suppression water works beneath through flush nozzles, its reinforced sub-frame electrophoresed against corrosion. Cab one-key programs plus a ground panel run the cycles; engine PTO drives the main fan with an auxiliary diesel for full sweep duty. On a 4700 mm wheelbase, trunk roads and boulevards are the natural fit.

WhatsApp your destination port - FOB price within 24 hours, plus the full spec sheet.

Reply within 12 hours · MOQ 1 unit · Build 15–30 days · Tell us your chassis, drive, capacity and color needs — we build to order
Factory-direct price (no trader markup) Supports 100% customization 2-year warranty + lifetime parts Full export docs (B/L, CO, invoice)

Sweep-suction body with stainless wear plates, dust suppression and large-capacity tanks, sweeping roads, ports and industrial parks in one pass.

Dongfeng 11cbm Sweep-Suction Truck for Trunk Roads

General

Vehicle Brand

DONGFENG

Overall Dimension

8350X2500X3210 mm

Rated Load Capacity

6670 kg

Total Mass

18000 kg

Cab

Air Conditioner

Standard

Engine

Fuel Type

Diesel

Power

Cummins 230 HP

Displacement

4087 ml

Chassis

Drive Type

4X2

Chassis Brand

DONGFENG

Transmission

Fast 8 gears

Wheelbase

4700 mm

Top Structure

1

The suction cup width is 2.4 meters, with a rear roller sweep suction cup and a built-in high-pressure spray rod. Water tank capacity: 3.5m', stainless steel trash bin capacity 7m' (the water tank and sub-frame are reinforced, slopes are added on the left and right sides of the trash bin, the self-cleaning spray rod is lengthened, the rear door is opened for spray dust reduction, and the water tank sub-frame is electrophoresed

2

Good vacuuming effect, cleanliness can reach more than 99%, no secondary dust, no water required:

3

It adopts a high-power diesel engine with large power reserve, and can reach up to More than 40%, which can meet the strict operating requirements of various roadbeds and fully consider the heat dissipation problems of diesel engines and hydraulic systems, ensuring the reliability and long life of diesel engines and hydraulic components, and the vacuum truck will not be affected by high ambient temperature:

4

One machine for multiple uses-can suck and sweep stones, coal blocks, sand and gold All kinds of garbage including dust, domestic garbage, fallen leaves and weeds can meet the requirements of suction and sweeping standards and non-standard road surfaces

Sweep System

Dual side brooms + central suction, full-width sweep 2.4-3.5 m

Trash Tank

11 m3 debris hopper with stainless wear lining

Water Tank

Spray-suppression water tank with flush nozzles

Vacuum Fan

High-flow fan, dust capture with filter shaker

Dust Control

Wet sweep + filtration keeps exhaust clean at the kerb

Nozzles

Kerb-flush side jets for gutter line cleaning

Discharge

Hydraulic hopper lift for tip-out at depot

Control

Cab panel with one-key sweep program; ground maintenance panel

Power

Engine PTO main fan; auxiliary diesel for full-sweep duty

Application

Trunk road and boulevard sweep-suction duty

Options

Self-cleaning filter, mist cannon mount, high-pressure washer, GPS route log

Docs & Warranty

GB announcement; 2-year upfit warranty

Key Upfit Features

  • 1: The suction cup width is 2.4 meters, with a rear roller sweep suction cup and a built-in high-pressure spray rod. Water tank capacity: 3.5m', stainless steel trash bin capacity 7m' (the water tank and sub-frame are reinforced, slopes are added on the left and right sides of the trash bin, the self-cleaning spray rod is lengthened, the rear door is opened for spray dust reduction, and the water tank sub-frame is electrophoresed
  • 2: Good vacuuming effect, cleanliness can reach more than 99%, no secondary dust, no water required:
  • 3: It adopts a high-power diesel engine with large power reserve, and can reach up to More than 40%, which can meet the strict operating requirements of various roadbeds and fully consider the heat dissipation problems of diesel engines and hydraulic systems, ensuring the reliability and long life of diesel engines and hydraulic components, and the vacuum truck will not be affected by high ambient temperature:

Factory Direct

CLW Chengli, Suizhou — ISO 9001 & CCC certified

MOQ 1 Unit

Mixed batch and stock chassis available

Export Ready

SEA / Ro-Ro / container + full documents

Lifetime Support

Genuine parts and remote commissioning

Send A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Subject : Dongfeng 11cbm Sweep-Suction Truck for Trunk Roads

Related Products

You may be interested in the following products...

FAQ About Sanitation Truck

How much does this truck cost and what is the MOQ?
CLW is a factory-direct manufacturer, so you get the lowest possible price without middlemen. Final price depends on chassis brand (ISUZU, SINOTRUK, SHACMAN, DONGFENG, FOTON, JAC), tank or body capacity and equipment options. MOQ is 1 unit for most models. Send your requirement via WhatsApp +86 159 6944 9241 for a detailed quotation within 12 hours.
Can you customize the capacity, chassis and upper equipment?
Yes. With 300+ product categories and 800+ models in our MIIT catalog, we customize body capacity, dimensions, unloading systems, PTO, hydraulic equipment and cab options to your local road regulations and working conditions. Our 500+ engineers provide drawings before production.
How do you ship to my country and what is the delivery time?
We export by RoRo vessel, 40FT/40FR/40OT container or flat rack depending on dimensions, to ports in Africa, Southeast Asia, the Middle East, South America and CIS countries. Standard delivery time is 15–30 working days after deposit. Export documentation (BL, CO, CI, packing list) included.
What warranty and after-sales support do you provide?
Two-year warranty on the whole vehicle (engine and gearbox covered per chassis manufacturer policy), lifelong genuine spare parts supply at factory price, free technical training for your maintenance team, and video/online support for installation and debugging.

Related Articles & Delivery Cases

At the 140th Canton Fair, CLW's Best Sales Tool Was a Calculator News At the 140th Canton Fair, CLW's Best Sales Tool Was a Calculator First Batch of Ten Heavy Fire Trucks Rolls Out from CLW for Malaysia News First Batch of Ten Heavy Fire Trucks Rolls Out from CLW for Malaysia 10 Units Dongfeng 6x4 Car Carrier Truck for Sale to Ghana, Hydraulic Upper Deck Auto Transporter Delivery Case 10 Units Dongfeng 6x4 Car Carrier Truck for Sale to Ghana, Hydraulic Upper Deck Auto Transporter 10 Units SHACMAN X6 Truck Mounted Crane for Sale, XCMG SQS175-4 7 Ton Boom to Uganda Delivery Case 10 Units SHACMAN X6 Truck Mounted Crane for Sale, XCMG SQS175-4 7 Ton Boom to Uganda

Request a Quote

Tell us your truck model and quantity — an engineer replies within 12 hours with a factory-direct price.

Factory-direct12-hour replyFOB / CIF / DDP
Home Products About Us Contact Us