16 CBM Compactor Garbage Truck for Sale – Dongfeng 4x2 Rear Loader with 240/660 L Bin Lift

★ A white Dongfeng Captain-D 4x2 rear-loading compactor with a 16 m³ sealed body, 240/660 L bin lift and a 160-200 hp diesel engine for municipal waste collection.

16 m³ Rear-Loading Compactor Body

▶ The body is a double-arch sealed steel compactor with a nominal volume of 16 m³ and a rear loading hopper of 3.5-4.5 m³. Twin hydraulic rams and a scraper pack the refuse against the body at a 2.5:1-3:1 compression ratio, so the truck carries the loose equivalent of a much larger open body.

The shell is built from wear-resistant steel with 4-5 mm side plates and a 5-6 mm floor, welded into a curved body without external ribs. A 1.0-2.0 m³ sewage tank under the hopper collects leachate, and the tailgate seal and drain valves keep liquid inside the body on route.

Dongfeng Captain-D 4x2 Chassis

▶ The chassis is the Dongfeng Captain-D 4x2 with a white cab, air conditioning, power steering and a 160-200 hp diesel engine of 4.5-6.2 L displacement. A 6-speed manual gearbox drives the single rear axle, and the truck runs on 8.25R20 or 9.00R20 tyres.

GVW is 14,000-16,000 kg, curb weight 8,000-9,500 kg and payload 4,500-7,000 kg, on a 4,200-4,500 mm wheelbase. Overall size is 8,400-8,900 mm long, 2,450-2,550 mm wide and 3,200-3,400 mm high, with a 120-160 L fuel tank, air brakes and a 24 V electrical system.

Bin Lift, Controls and Hydraulics

▶ A two-arm rear bin lift takes 240 L and 660 L wheelie bins and tips them into the 3.5-4.5 m³ hopper. Loading takes 15-25 s and unloading 30-45 s, with the packer controlled from the cab and from a rear control box beside the hopper.

The hydraulic system runs at 16-18 MPa with a 60-90 L oil tank, multi-way valves, balance valves and cylinders with hydraulic locks. The pump is driven by a gearbox PTO, and the filler lift is interlocked so the packer cannot move while the hopper is raised.

Applications and Export Delivery

▶ The truck suits municipal household waste routes, estate and compound collection, market and commercial-zone cleaning, transfer-station feeding and disaster clean-up. The 16 m³ body and 240/660 L bin lift cover dense low-rise districts where a narrow 4x2 truck is easier to place than a 6x4.

Left-hand drive is standard and right-hand drive is available to order. Options include a reversing camera, extra work lights, a stainless liner, a larger bin lift and an export spare-parts kit. Production is 25-40 days, with container or ro-ro shipping and full export documents.

Frequently Asked Questions

How much waste does the 16 m³ body hold?

The nominal body volume is 16 m³ and the hopper holds 3.5-4.5 m³. With a 2.5:1-3:1 compaction ratio the body carries the loose equivalent of 40-48 m³, while the actual tonnage depends on waste density.

Which chassis and engine does this truck use?

The chassis is the Dongfeng Captain-D 4x2 with a 160-200 hp diesel engine, 6-speed manual gearbox, 14,000-16,000 kg GVW and 4,200-4,500 mm wheelbase.

Can it be supplied with right-hand drive?

Yes. Left-hand drive is standard and right-hand drive is available to order, with the bin lift and control boxes matched to the driving side. Production is 25-40 days.

Send your route length, bin size, drive position and destination port for a Dongfeng 4x2 16 m³ compactor garbage truck quotation within 24 hours.