SHACMAN X9 7cbm Compactor Garbage Truck for Narrow Streets

SHACMAN

8750X2550X3330 mm

2150 kg

18000 kg

Standard

Diesel

147KW/199HP

Engineer:YUCHAI200;4156 ml

4X2

SHACMAN

Fast 8 Gear

4500 mm

Adopting a well-known brand hydraulic system, the multi-way valve confluence corresponding to the dual pump system can be optionally equipped, so that the flow matching of the dual pump circulation speed can be achieved without throttling and speed reduction. It has a two-way compression function, high compression efficiency, and large garbage loading capacity. When unloading, the scraper and the slide plate automatically realize a cycle after the filler is lifted into place, and the garbage remaining in the filler is cleaned.

The compression box and other main components are made of T700 high-strength weathering steel plate. The overall frame structure design is simple and beautiful, with large effective volume, outstanding overall structural performance, strong impact resistance, and high-strength arc-shaped integral push plate, which has strong pressure bearing capacity. Good anti-deformation ability.

Equipped with a large-capacity sewage tank, combined with a diversion sewage collection device, the sewage leaked between the filler and the garbage box due to the failure of the sealing strip can be diverted to a special sewage collection tank, effectively preventing secondary pollution caused by sewage leakage

The joint between the filler and the box adopts an adjustable hydraulic locking full-sealing technology with good sealing performance. The push plate slider is made of high-wear-resistant alloy material with a long service life

Equipped with a number of safety protection measures such as the upward slide plate, the scraper rotation button, the emergency stop button, the interlock switch to prevent the loader from falling, and the self-locking function of the loader lifting cylinder to ensure the safety of the users.

Adopting the CAN bus intelligent control system, it can be centrally controlled in the cab, with various automatic, manual, and false control modes. It can control the operation of the garbage truck in the cab, the rear of the vehicle, etc., which is convenient and efficient. It is equipped with night work lights to facilitate sanitation workers to work at night and expand the working time range

A sealing cover can be installed at the open end of the loader. The cover switch is pneumatically controlled, easy to operate, and can effectively prevent secondary pollution of garbage odor. The hydraulic buffer device for the lift of the loader and the scraper slide is added to slow down the hydraulic and mechanism impact, reduce the operation noise, and ensure the service life of key components.

The garbage bin lifting mechanism can lift two 120L or 240L garbage bins at the same time. It can be equipped with two standard garbage bin lifting mechanisms with lifting volumes of 120L, 240L, and 660L. It can be equipped with triangular bucket, sealed bucket, and swing arm bucket loading methods.

7 m3 double-arch fully sealed body

Two-way compression, typical ratio 1:2 to 1:3

5 mm Q345 manganese steel, full-penetration welded arc body without stiffening ribs; reinforced floor and filler hopper

Rear hopper with plunger packer + scraper; 240/660 L bin flip lifter standard

Loading

Siemens PLC one-button auto/manual; left + right ground control boxes plus cab-side pendant

Imported multi-way and balance valves; cylinders with hydraulic locks; filler-lift interlock

Rear + side sewage tanks with quick drain; full-perimeter rubber seal band — zero leakage on route

Gearbox PTO from engine — no auxiliary motor; night work light and travel alarm standard

Reversing camera, large ground bucket, arm-compression combo, stainless liner, 1100 L lifter

GB announcement + purchase-tax exemption; 2-year upfit warranty, lifetime spare parts