A batch dispatch of Chengli truck-mounted cranes and aerial work vehicles, showing the units lined up and prepared for delivery to customers.
What the video shows
This clip records a batch dispatch of Chengli special trucks — truck-mounted cranes and aerial work vehicles lined up together before delivery. The units show the two body families side by side: cargo trucks carrying folding knuckle cranes for lifting, and platforms built for working at height. Preparing a mixed batch like this means each unit is checked, documented and driven out in an order that keeps similar chassis and equipment together.
Truck-mounted cranes: lifting where the job is
A truck-mounted crane puts a lifting machine on a road-going chassis, so it can drive to a site and be ready to work without a separate crane arriving. The crane folds down over the cargo bed when travelling and deploys on site using outriggers for stability. Buyers choose them by lift capacity at a given reach, boom configuration, and the chassis that suits the terrain. They are common in construction, utilities, tree work and any operation that needs to lift and carry in the same trip.
Aerial work vehicles: reaching height safely
Where a crane lifts loads, an aerial work vehicle lifts people to a work position. Telescopic booms reach high and far in a straight line; articulated booms fold around buildings and obstacles. Working height, platform capacity and outrigger footprint determine which unit fits a site. Both types are mounted on truck chassis so crews can move between jobs quickly, a reason they are often ordered together by utility contractors and municipal fleets.
How a batch dispatch is prepared
Before a fleet leaves the plant, each truck goes through a pre-delivery check: the crane or boom is cycled through its range, hydraulics are inspected for leaks, outriggers and stabilisers are tested, and the body is secured for transport. Documents, warnings and equipment lists are matched to each chassis number. Photographs are taken so the customer can reconcile the delivered units with the order, and the trucks are then dispatched in groups.
Related crane and aerial work models
The Dongfeng 10-ton truck-mounted crane and the Beiben 4x4 foldable-boom crane truck cover lifting duties on different terrains, while the FAW 12 m aerial work vehicle is a compact option for work at height. Send us your lift capacity, working height and terrain and the CLW team will propose a configuration.
Truck mounted aerial work platform options
Fleets comparing a truck mounted aerial work platform with a crane body usually look at reach, load chart and how quickly the unit changes between lifting and personnel work. The truck with crane and aerial combinations shown here are built to order; ask for the specification sheet to match the vehicle to the job site.


