JAC 4x2 Rear Loader Compactor Garbage Truck for City Routes

JAC

8280 kg

Standard

Diesel

120KW;163HP

Yunnei, Cummins, Yuchai engines are optional ;2977 ml

4X2

JAC

Xingrui 6 gear

4200 mm

The compression box and other main components are made of T700 high-strength weathering steel plate. The overall frame structure design is simple and beautiful, with large effective volume, outstanding overall structural performance, strong impact resistance, and high-strength arc-shaped integral push plate, which has strong pressure-bearing capacity. Good anti-deformation ability.

It adopts a well-known brand hydraulic system, and can be equipped with a multi-way valve confluence corresponding to the dual pump system. The flow matching of the dual pump circulation speed can be achieved without throttling and speed reduction. It has a two-way compression function, high compression efficiency, and large garbage loading capacity. When unloading, the scraper and the slide plate automatically realize a cycle after the filler is lifted into place, and the garbage remaining in the filler is cleaned.

It is equipped with a large-capacity sewage tank, combined with a diversion sewage collection device, which can drain the sewage leaked between the filler and the garbage box due to the failure of the sealing strip to a special sewage collection tank, effectively preventing secondary pollution caused by sewage leakage.

The joint between the filler and the box adopts an adjustable hydraulic locking full-sealing technology with good sealing performance. The push plate slider is made of high-wear-resistant alloy material with a long service life.

Equipped with a number of safety protection measures such as the slide up button, scraper rotation button, emergency stop button, interlock switch to prevent the loader from descending, and self-locking function of the loader lifting cylinder to ensure the safety of users.

Adopt CAN bus intelligent control system, centralized control can be carried out in the cab, with automatic, manual, remote control and other operation modes, can be integrated in the cab, the rear of the vehicle and other multi-position control of garbage truck operation, convenient and efficient, equipped with night working lights, convenient for sanitation workers to work at night, expand the working time range

Sealing plate can be installed at the open end of the filler, the plate switch is pneumatically controlled, easy to operate, can effectively prevent secondary pollution of garbage odor, increase the filler lifting and scraper slide hydraulic buffer device, slow down the hydraulic and mechanism impact, reduce the operation noise, and ensure the service life of key components. .

The garbage bin lifting mechanism can lift two 120L or 240L garbage bins at the same time, and can be optionally compatible with three standard garbage bin lifting mechanisms with lifting capacity of 120L, 240L, and 660L, and can be optionally equipped with triangular bucket, sealed bucket, and swing arm bucket loading methods

8 m3 double-arch fully sealed body

Two-way compression, typical ratio 1:2 to 1:3

5 mm Q345 manganese steel, full-penetration welded arc body without stiffening ribs; reinforced floor and filler hopper

Rear hopper with plunger packer + scraper; 240/660 L bin flip lifter standard

Loading

Siemens PLC one-button auto/manual; left + right ground control boxes plus cab-side pendant

Imported multi-way and balance valves; cylinders with hydraulic locks; filler-lift interlock

Rear + side sewage tanks with quick drain; full-perimeter rubber seal band — zero leakage on route

Gearbox PTO from engine — no auxiliary motor; night work light and travel alarm standard

Reversing camera, large ground bucket, arm-compression combo, stainless liner, 1100 L lifter

GB announcement + purchase-tax exemption; 2-year upfit warranty, lifetime spare parts