This Sinotruk HOWO 6x4 multifunctional truck combines ice breaking and snow removal in one vehicle on a 440 HP chassis with a 25,000 kg gross mass. A front hydraulic lifting rotary snow brush clears the lane, a rear mounted auxiliary brush cleans the residual snow the front pass leaves behind, and a large-capacity de-icing spreader lays salt or melting agent behind the truck.
All snow removal devices are controlled by a hydraulic proportional system from inside the cab, with one-key operation across the set. The cold region package adds intake heating, urea heating and cold-start electric heating, so the truck starts and works in deep frost.
It is built on a HOWO double-row cab, 6x4 drive, three axles and ten heavy-duty off-road tyres, with power-assisted steering, air brakes with ABS, an aluminium alloy fuel tank and a maximum speed of 85 km/h. The body uses high-strength carbon steel with anti-corrosion treatment and a maintenance ladder, and the truck is used for highway, urban road, airport and large-square snow clearing.

440 HP HOWO diesel | 25,000 kg gross mass | 3 snow tools in one | 85 km/h max speed |
▶ The front hydraulic lifting rotary snow brush is the primary working tool. It rotates at the front of the truck and throws snow clear of the lane rather than pushing it into a windrow that later traffic spreads back. Hydraulic lifting lets the operator set brush pressure on the road surface and raise the brush at junctions, bridges and raised markings.
The brush works at a wide swath, so a single pass covers most of a lane and the truck does not need repeated runs to clear a carriageway. Because the brush is hydraulically driven rather than mechanically linked to the driveline, brush speed stays constant while the truck moves slowly, which is what clears wet snow without polishing ice. The truck also pushes snow as it works, combining the two functions in one machine.

Snow Equipment | ||
| Front | Tool | Hydraulic lifting rotary brush |
| Drive | Hydraulic | |
| Use | Primary lane clearing | |
| Rear and Spreader | Rear brush | Auxiliary secondary cleaning |
| Spreader | Large-capacity de-icing bin | |
| Cover | Hydraulic top cover | |
| Spread width | Adjustable | |
| Material | Salt or melting agent | |
▶ A rear mounted auxiliary snow brush gives the road a second clean after the front pass, lifting the residual snow that the front brush leaves at the edges. On a highway shoulder or an apron where the surface has to be clear to the last centimetre, this second pass is what keeps the truck from having to run the route twice.
The de-icing spreader carries a large-capacity bin with a hydraulic top cover, and spreads salt or snow-melting agent with an adjustable width. The cover keeps material dry between runs, which matters because wet salt cakes in the bin and stops feeding. Spread width is set from the cab, so the operator can narrow the pattern for a single lane and widen it for a junction or a ramp.
Control and Cold Package | ||
| Controls | System | Hydraulic proportional |
| Location | Inside cab | |
| Mode | One-key for all devices | |
| Cold Package | Intake | Heating |
| Urea | Heating | |
| Cold start | Electric heating | |

▶ All snow removal devices run from a hydraulic proportional control system operated inside the cab, with one-key control across the set. Proportional control means the operator can feather brush speed and spread rate instead of switching them fully on or off, which is what a bridge deck or a toll plaza needs. Everything is controlled from the seat, so the crew does not leave the cab in a storm.
The cold region package adds intake heating, urea heating and cold-start electric heating, so the diesel starts and the SCR system keeps working in deep frost. Urea freezes at around minus eleven degrees, and an unheated tank will not dose, so the heating is part of the winter build rather than a comfort item. These measures are what make the truck usable in heavy snow at extreme low temperature.
Chassis and Body | ||
| Chassis | Brand | Sinotruk HOWO |
| Drive | 6x4, LHD | |
| Curb and GVW | 25,000 kg gross | |
| Engine | In-line 6-cyl turbo intercooled, 440 HP | |
| Axles | 3 | |
| Tyres | 10, heavy-duty off-road | |
| Brakes | Air with ABS | |
| Max speed | 85 km/h | |
| Cab and Body | Cab | HOWO double row |
| Steering | Power-assisted | |
| Fuel tank | Aluminium alloy | |
| Body | High-strength carbon steel | |
| Finish | Anti-corrosion | |
| Access | Maintenance ladder | |
▶ The chassis is a HOWO 6x4 with three axles and ten heavy-duty off-road tyres, a 440 HP in-line six-cylinder turbocharged intercooled diesel and a 25,000 kg gross mass. Power-assisted steering, air brakes with ABS and an aluminium alloy fuel tank are standard, and maximum speed is 85 km/h. Overall dimensions and wheelbase are confirmed on the final drawing, because the front brush and rear spreader change the overall length.
The body is high-strength carbon steel with anti-corrosion treatment and a maintenance ladder, since salt and wet snow attack a body faster than dry cargo does. The truck is used for highway, urban road, airport and large-square clearing. Units ship by sea or ro-ro with export documents, and the buyer confirms local winter-service regulations and the salt grade available before the spreader is specified.
Can one truck clear snow, break ice and spread salt?
Yes. The truck carries a front rotary brush, a rear auxiliary brush and a de-icing spreader, all run from a hydraulic proportional system in the cab with one-key control. One pass brushes the lane, the rear brush cleans the edge and the spreader lays salt behind. A route that used to need a brush truck and a separate spreader runs as one vehicle.
Will it start in extreme cold?
The cold region package adds intake heating, urea heating and cold-start electric heating exactly for that. Urea freezes at around minus eleven degrees and an unheated tank cannot dose, so the SCR heating is part of the winter build. Tell us the lowest working temperature on your route, because the cold-start specification and battery are sized to it.
What are the overall dimensions?
Overall dimensions and wheelbase are confirmed on the final drawing rather than fixed here, because the front brush and the rear spreader both add to the overall length and the brush overhang decides the turning envelope. Once you confirm which tools you want, we issue the drawing with dimensions and the axle load positions.
Send your route, lowest working temperature and destination port for a factory FOB quotation, equipment layout and shipping plan within 24 hours.
✔ 440 HP HOWO
In-line six turbo intercooled diesel, 6x4, three axles.
✔ Three tools, one truck
Front brush, rear brush and de-icing spreader.
✔ Cab-side control
Hydraulic proportional, one-key for all devices.
✔ Cold package
Intake, urea and cold-start heating for deep frost.
News
Electric Garbage Truck Body Lightweighting: Balancing Strength and Range
News
At the 140th Canton Fair, CLW's Best Sales Tool Was a Calculator
Delivery Case
BYD 4x2 Electric Box Truck for Sale with Custom Spanish Curtain Livery
Delivery Case
8 Units SHACMAN X5S Cab-Controlled Water Sprinkler Trucks for Sale to Southeast Asia
Tell us your truck model and quantity — an engineer replies within 12 hours with a factory-direct price.
Tell us the model and your requirement — an engineer replies within 12 hours, factory direct.